OKX download

List of contents of this article:

• 1,OKX download Why can't the system boot disk made by the USB flash drive be installed?
• 2, How to install the system when the old computer does not support the USB flash drive
• 3, After the computer enters the USB disk system, you can see the hard disk, but the system can't be installed?

Why can't the system boot disk made by the USB flash drive be installed?

1. The boot disk is not done well. It is recommended to install the system with the original version of Microsoft, which has the best compatibility and stability.

2. Therefore, most of the motherboards of computers now use BIOS to integrate UEFI, or UEFI integrates BIOS to achieve the purpose of both compatible with MBR and GPT boot systems.Because the way of GPT booting the system is different from that of MBR, we need to manually turn on UEFI or set it to Legacy mode when installing the system.

3. The computer can't start up the USB disk installation system tutorial illustration? In the process of using the computer, we often encounter the phenomenon of not being able to enter the system normally due to illegal shutdown, viruses, system file damage and other faults. Next, we will share the specific steps on how to install the system through the USB flash drive when the system crashes.

4. Second, install the recovery system. Insert the USB flash drive into the computer to install the system, turn it on, keep pressing f12, and then select the USB flash drive driver. After the startup is normal, run the hard disk installer or GHOST image installer in the USB flash drive, automatically identify the backup gho file, and select restore.

How to install the system if the old computer does not support the USB disk startup

1. Select the change type as Sixth, then click the installation configuration, as shown in the figure below: then select and click according to which option is available in your motherboard bios. That's fine. We have written the boot to the USB flash drive.Restart and select the USB flash drive to start it.

2. First, prepare a tool called "BOOTICE.EXE" USB disk tool. You can directly search and download it online. After downloading, double-click to run the software directly. You can select the motherboard boot record from the open interface.

3. Press the Del key to enter the BIOS setting interface and select Advanced BIOS Settings AdvancedBIOSFeatures.

4. Use BOOTICE.EXE to write the main boot record to the hard disk as GRUBDOS. The boot file name is grldr. Download a USB disk boot tool and make your USB disk a USB disk to boot. Put the downloaded system into the folder to start the USB flash drive, such as GHOST_WINGHO.

5. Open the software, click online reinstall, select win10, click to install this system 2 Wait for the system file to be downloaded, click restart immediately 3 Select pe system on the Windows boot management page to enter 4 in the pe system, the small white installation tool will help us reinstall the system , we can wait for the installation to be completed and click to restart immediately.

6. So you only need to set the first startup item. The solution to the computer cannot start and install the system from the USB flash drive is as follows: Tools to be prepared: computer, bios setting interface. Set ata setup to IDE mode in the system bios. Repartition the hard disk and set the first partition as the main partition.

After the computer enters the USB disk system, you can see the hard disk, but the system can't be installed?

Solution: Check whether the hard disk data cable is successfully connected, enter the BIOS, and change the AHCI mode to IDE mode settings.

In addition, BIOS only supports the MBR boot system, while GPT only supports the UEFI boot system. Therefore, most of the motherboards of computers now use BIOS to integrate UEFI, or UEFI to integrate BIOS to achieve the purpose of compatible with MBR and GPT boot systems at the same time.

In addition, the black screen after installing the system may be caused by the mismatch between the boot and disk partition mode. BIOS settings change the boot operation method: First, we restart the computer and press the f2 or del key to enter the bios settings, (the shortcut keys set by different computers' bios are also different.

Restart the computer, press the F12 key to enter the boot menu and select the USB flash drive to start. If you can't enter the boot menu, you need to pay attention to the button at the bottom of the screen to enter the BIOS when restarting the computer, and use the USB flash drive to set the USB flash drive as the first boot item. Use the optical disc to set up the optical drive. After setting, press F10 to save and restart.