Binance exchange

List of the table of contents of this article:

• 1、Binance exchange What should I do?' title='Why can't the Gigabyte motherboard enter the system? What should I do?' > Why can't the Gigabyte motherboard enter the system? What should I do?
• 2, What should I do if the Gigabyte motherboard can't enter the system?
• 3, How to install the system on the Gigabyte motherboard?

Why can't the Gigabyte motherboard enter the system? What should I do?

Software conflict: Some software may be incompatible with the PE environment, causing the system to get stuck after entering PE. Try to disable all unnecessary startup items and services at startup to eliminate software conflicts. Update the driver: Try to update the driver of the Gigabyte motherboard, including chipset driver, BIOS firmware, etc.

If the problem persists, you may need to consider updating or replacing the motherboard. If the above methods cannot solve the problem, you can try to use other startup devices to start the computer.For example, you can use a boot disk or a boot USB flash drive to boot the system to check whether it is a hard disk problem and the system cannot be accessed.

The first is the hard disk failure. The motherboard cannot recognize the boot disk and actively exit the BIOS. You can see here whether the BIOS can still recognize your boot disk. If it can be recognized, you can also try to repair the boot program and the boot area. If it can't be recognized, I'm afraid the hard disk will have to be replaced.

It is recommended to enter the safe mode for diagnostic startup. The computer may not be able to detect the hard disk. If your computer can detect the hard disk every time but cannot enter the system, completely format the hard disk and then reinstall the system. If it doesn't work, it is recommended to go to the repair shop to repair it to avoid bigger problems.

What should I do if the Gigabyte motherboard can't enter the system?

The first is the hard disk failure. The motherboard cannot recognize the boot disk and actively withdraws to the BIOS. You can see here whether the BIOS can still recognize your boot disk. If it can be recognized, you can also try to repair the boot program and the boot area. If it can't be recognized, I'm afraid you have to change the hard disk.

such asIf you still can't enter the Win10 page, it may be that there is a problem with the system. You can try to repair the system. The specific method can be queried through search engines, such as selecting "Repair Your Computer" on the Win10 installation disk. In addition, it may be caused by hardware problems, such as the failure of memory, hard disk, etc.

Keyboard and mouse, power-on self-test will detect the mouse and keyboard. If there is a problem, it will be stuck in the self-test interface. The solution is to unplug the keyboard and mouse to check whether it passes the self-test. If it passes the self-test, replace the mouse and keyboard.

Turn on the chassis when the power is cut off, unplug the optical drive and hard disk cables, and turn it on to see if the computer can start. If so, restore the connection of the optical drive and hard disk. Clear the COMS method. As soon as you find the CLRTC jumper, unplug the cmos jumper from 1~2pin and plug it into 2~3pin.

First, the operating system is damaged and the boot fails. Second, it is a hardware failure, and the hard disk cannot be detected. Generally, the hard disk is damaged or there is no normal connection. Check the BIOS hardware detection. If the hard disk is displayed, it is the former, and the system can be reinstalled; if the hard disk is not displayed, it is the latter. Please check the hard disk data cable and power cable.

How to install the system on the Gigabyte motherboard?

After the program is restored, the computer will be restarted, and then the program will be installed. Wait until the installation is completed, and finally the system will be set up. After the setting is completed, you can use the win8 system.

The easiest way is to install the system with a USB flash drive. The USB flash drive installation system can be described as a fool-proof one-click installation, which makes the installation steps of the system extremely simple.

When we make the USB boot disk, we need to enter the bios for relevant settings to enter the pe. So today, we will take the Gigabyte motherboard bios setting as an example to teach you how to install the system bios settings with the Gigabyte motherboard USB disk. If you don't know, you might as well learn it.

The main way to start the BIOS settings of the Gigabyte motherboard from the USB flash drive is as follows: First, when starting the computer, when the prompt appears on the screen, quickly press the F12 key to enter the quick start menu, as shown in the figure below.