Binance app

List of Contents of this article:

• 1, 2、Waterknife computer reinstallation system, how to operate Weihong system
• 3, How to operate Weihong 10.5 system fixed pair and floating pair
• 4, How many versions of Vihong system

How about Vihong system 53c Set up binary cycle processing

1. After the control software is installed, open the control software, click "System Parameters", enter the correct processing parameters and manual parameters, click the "Application" button, open the "System Parameters" and enter the password "NCSTUDIO" to open the system parameters In the dialogue box, enter the correct parameter, and click Apply to save the parameter.

2. After clicking the open button, the processing program will load into the system. At this time, users can press the F2 key to switch to the processing program window to view the current processing program.

3. First, find "Settings" on the panel and press "Settings" to enter the settings page. There is a button for "CNC Settings" at the bottom of the settings page. Then press the corresponding soft key below, and the "System Time" button will appear. Press the soft key under "System Time" to enter the time page.

4. When processing a component, the Weihong control system needs to use different tools. When writing the processing program, it needs to set the position and switching method of the tool switching in the program, so that the system will switch the tool according to the preset order and method when performing the processing task. Processing operation.

5. Click "System Parameters" first. Secondly, enter the corresponding "processing speed" according to the material and tool situation. Then click "Processing Track".Weihong Control System, also known as NCStudio CNC System, is an engraving machine motion control system independently developed by Shanghai Weihong Technology Co., Ltd. and has its own copyright.

Waterknife computer reinstall system, how to operate Weihong system

Turn on the computer power, start the computer, and the system will automatically run into the Windows operating system. If you haven't installed the Windows operating system yet, please install the operating system first. After starting the Windows operating system, close other running programs. Put the NCStudio system installation CD into the optical drive.

This situation is because the driver of Vihong Card is not installed, and it cannot be opened simply by installing Vihong operating software.

· After starting the Windows operating system, close other running programs. · Put the NCStudio system installation CD into the optical drive. · Double-click "My Computer", open it, and then double-click the optical drive symbol.

Select Open (F) | Open (O)... menu, and the Windows standard file operation dialog box will pop up, from which you can select the drive, path and file name where you want to open the file. After clicking the open button, the processing program will load the system. At this time, users can press the F2 key to switch to the processing program window to view the current processing program.

How to operate the fixed tool and floating tool in the Weihong 10.5 system

First, turn on the power supply of the machine tool, place the workpiece on the workbench, and fix it on the workbench with a fixture. Then manually move the tool close to the surface of the workpiece and observe whether the tool is in contact with the workpiece. Finally, after completing the tool operation, turn off the power supply of the machine tool and remove the workpiece and fixture.

Return to zero (return to the origin of the machine tool) before the knife, oneThe operation of returning to zero (returning to the origin of the machine tool) must be carried out in order to clear the coordinate data of the last operation. Note: All three axes of X, Y and Z need to return to zero. The spindle rotates in "MDI" mode to rotate the spindle by entering the instruction code and maintain a medium rotation speed.

The method of calling the floating knife program in the imitation macro system is as follows: open the knife method of the imitation macro system. Choose the floating knife from the fixed knife and floating knife in the knife method. The system will operate the knife according to the type of knife you set.

First, turn on the power supply of the machine tool and the computer power supply. After the system starts, enter the "Ncstudio" numerical control system. Secondly, select the "Open" menu, pop up the Windows standard file operation dialog box, and press F2 to switch to the processor window.

Click Apply after setting. In this way, click the floating knife under the operation menu, and the Z axis will slowly descend. When it touches the knife block, it will automatically bounce up to realize the automatic knife. When it touches the knife, it will automatically clear it! Then lift it up for a certain distance and start processing directly.

There are several versions of the Vihong system

The difference is that the versions are different. V8 is the latest version. Vihong is a kind of control system. If there is no control card, it is useless even if there is a place to download it, and Vihong is a control system for the machine. Weihong system generally refers to Weihong control system.

According to the official website of Weihong, the Weihong control system can be used on different operating system platforms.Run on, including Windows XP, Windows Windows 8 and Windows 10, etc.

The genuine system of Weihong supports all eng format files of Beijing Jingdiao version 5, version 20 and version 19. There is no need for file conversion, which is more convenient for customers who already have Jingdiao machines or customers who are familiar with Jingdiao typesetting software. And pirated Weihong does not support it.

Vihong control system win10 can be installed. Ncstudio is a self-developed and copyrighted engraving machine motion control system launched by Shanghai Weihong Technology Co., Ltd., also known as Weihong control system. Ncstudio perfectly supports the 32-bit and 64-bit systems of winwinwin10, which is very powerful.

XP.Shanlong system is also known as Weihong 53C. The difference is that Shanlong is a computer system all-in-one machine, and Weihong 53C still needs to be connected to another computer. Weihong 53c uses the XP version of the system, and the memory should be at least 4G memory.

Vihong does not support win7 at present. Moreover, many related engraving machine design software are not supported. XP system is recommended.